Manual PET Preform Feeding Blow Molding Machine 2L-5L 2018-04-21T13:43:21+00:00

Project Description

Manual PET Preform Feeding Blow Molding Machine 2L-5L
Send Inquiry


Technical characters:
1、High safety. High speed with high efficiency.
2、Manual saving, one man is enough for operation the machine.
3、Stable performing with easy maintaining.
4、Imported PLC controller and man-machine interface computer.
5、Japan Omron inspection sensor.

Items

General Information

JG-2C2L

JG-1C5L

Container

Theoretical Output

2500 pcs/hr

750pcs/hr

Max.container volume

2L

5L

Max.neck diameter

45mm

50mm

Max.container diameter

100

175

Max.container height

340mm

350mm

Number of cavity

2cavity

1cavity

Electrical System

Total power

25kw

25kw

Use Power

15kw

15kw

Air System

Working Pressure

1.0Map

1.0Map

Low Pressure Consuming

1400L/min

1400L/min

Blow Pressure

≤3.5Mpa

≤3.5Mpa

High Pressure Consuming

1200L/min

1200L/min

Chiller Water

Operating Pressure

0.3-0.5 Mpa

0.3-0.5 Mpa

Temperature

10-12 ℃

10-12 ℃

Flow Rate

30L/min

30L/min

Machine Data

Machine Dimension

1.9×1.6×2.0m

2.0×1.4×2.0m

Machine Weight

1200kg

1600kg

1、High safety. High speed with high efficiency.
2、Manual saving, one man is enough for operation the machine.
3、Stable performing with easy maintaining.
4、Imported PLC controller and man-machine interface computer.
5、Japan Omron inspection sensor.
6、Adopt the new type double bend arm and four pull rod-clamping structure(won the patent):Cross direction; Middle mould board is move parallel; The distance between two mold board is adjusted by the chain wheel.Thus,the clamping force is very strong. Power saving design that can increase your profits.
7、Segregate type air controlling system, which is designed for avoiding waste pollution.