Precise and energy injection molding machine D160S 2018-04-21T14:32:24+00:00

Project Description

Precise and energy injection molding machine D160S
Send Inquiry


Precise and energy injection molding machine 160TON

**Function list for Injection Unit
-Standard -Nitride Screw and barrel, stainless hopper
-Screw RPM display
-Plasticizing with hydraulic motor
-Two parallel injection cylinders.
Ensure no skewing on spray nozzle and no leaking of materials

2. Standard Features
**Function list for Injection Unit
-Standard -Nitride Screw and barrel, stainless hopper
-Screw RPM display
-Plasticizing with hydraulic motor
-Two parallel injection cylinders.
Ensure no skewing on spray nozzle and no leaking of materials
**Function list for Clamping Unit
-T-Slot mold platen
– High rigid 5 points clamping unit
-Mechnical and electrical safety
-Hydraulic motor for mould height adjusting
-Auto- mold height adjusting function
-Clamping & mould open control with transducer
-Auto-monitoring central lubrication system
-Adjustable support for moving platen
-High rigid steel slide tape for moving platen
-One group of water regulators
**Function list for Hydraulic Unit
-Oil temperature control and alarm
-Oil tank level and alarm
-Oil suck filter and air filter system

**Function list for Electronics Part
-Techmation brand computer controller
-80-100 sets of mold parameter memory
-All action instant monitoring function
-Production monitoring function
-Failure &alarm display function
-I/O monitoring interface
-3 color light (with alarm)
-Electrical motor overload protection
-Front/back door emergency stop switch
-15A/5 pins single phase socket, one group
-Double protection for heating
-SSR heating control
3.Mold platen drawing

4. Machine Size

Unit D160S
ITEMS A B C
INECTION UNIT Screw Diameter mm 42 45 50
Screw L/D Ratio L/D 21.4 20.0 18.0
Shot Size(Theoretical) cm3 287 329 406
Injection Weight g 261 300 370
Injection Pressure MPa 212.8 185.4 150.2
Injection Rate into Air cm3/s 125 156.3 143.5 179.4 177.2 221.4
Injection Stroke mm 207
Injection Speed cm/s 9/11.3
Screw Speed rpm 202 /252
CLAMPING UNIT Clamping Force KN 1600
Clamping Stroke mm 480
Space Between Tie Bar mm 470*470
Max. Mold Height mm 530
Min. Mold Height mm 200
Eject Stroke mm 150
Eject Force KN 34
No. Of Ejector Pins piece 5
OTHERS Max. Pump Pressure MPa 17.5
Pump Motor Power KW 15.0 18.5
Heater Power KW 9.4
Hopper Capacity Kg 25
Oil Tank Capacity L 350
Weight T 5.2