Project Description

Semi Automatic 5gallon bottle blowing machine
Send Inquiry


1、 Adopt new type double bend arm and four pull rod-clamping structure (won the patent).cross direction; middle mould board is move parallel; the distance between two mold boards is adjusted by the chain wheel.Thus, the clamping force is very strong.
2、The machine frame is produced by the whole complete casting bottom, so that the machine are firm and running stable.
3、Adopt straight slide way, reduce the friction and lengthen the life of the machine.
4、 Double start marking button, which is designed for avoiding the injury.

GENERAL INFO

SG20L

Configuration

  One main blowing machine

    One infrared heater

Theoretical output

120PCS/hr

Heating capacity

35kw

Max bottle volume

20L

Blowing pressure

≤3.5Mpa

Motion Pressure

≤1.0Mpa

Max*diameter*height

Ø 280XH450mm

Mould thickness

300~400mm

Weight

1500kg

Main blowing Machine

2200*700*2250mm

Heater

2200*700*1700mm

1、 Adopt new type double bend arm and four pull rod-clamping structure (won the patent).cross direction; middle mould board is move parallel; the distance between two mold boards is adjusted by the chain wheel.Thus, the clamping force is very strong.
2、The machine frame is produced by the whole complete casting bottom, so that the machine are firm and running stable.
3、Adopt straight slide way, reduce the friction and lengthen the life of the machine.
4、 Double start marking button, which is designed for avoiding the injury.
5、 Power saving design that can increase your profits
6、The single direction of pre-form placing and bottle picking, which increase the output.
7、Segregate type air controlling sysem, which is designed for avoiding waste pollution.
8、 The stretching air cylinder is adjusted paralled from front to back, from left to right freely by regulator.